Micro VFD

TI10 Series VFD

Category:
General Details

1.1 Appearance and installation dimensions

Figure1-1 Installation Dimension Diagram of TI10-4T0.75G/1.5LB~TI10-4T3.7G/5.5LB

 

Table1-1 TI10 Installation Dimensions

Variable Frequency Drive model Appearance and installation dimensions (mm)
W H D W1 W2 H1 Installation

Aperture

TI10-4T0.75G/1.5LB 74 211 158 62 52 200 4.5
TI10-4T1.5G/2.2LB
TI10-4T2.2G/3.7LB
TI10-4T3.7G/5.5LB

1.2 Rated specifications

Table 1-2 rated specifications

Variable Frequency Drive model Power supply capacity(kVA) input current (A) Output current

(A)

Adapted motor

(KW)

TI10-4T0.75G/1.5LB 2.8 2.4 2.3 0.75
TI10-4T1.5G/2.2LB 5.0 4.6 3.8 1.5
TI10-4T2.2G/3.7LB 6.7 6.3 5.1 2.2
TI10-4T3.7G/5.5LB 12 11.4 9.0 3.7

1.5 Standard wiring diagram

Figure 1-2 Standard Wiring Diagram

1.5.1 Wiring description for control terminals

Figure 1-3 Layout of Control Terminal

Table 1-4 Function Description of Control Terminal

Analog input +10V Analog input reference voltage 10V ±1%,internally isolated from COM
The maximum output current is 20mA
GND Analog ground Internal isolation from COM
AI1 Analog input channel 1 0~10V:input impedance 22kΩ
0~20mA:input impedance 500Ω
The switch between 0~10V and 0~20mA analog input is realized through dial switch S400, and the factory default voltage is input.
AI2 Analog input channel 2 0~10V:input impedance 22kΩ
Analog output AO Analog output 2 0~10V:input impedance≥10kΩ
0~20mA:impedance requirement 200Ω~500Ω
The switch between 0~10V and 0~20mA analog output is realized through dial switch S400, and the factory default voltage is output.
GND Analog ground Internal isolation from COM
Digital input COM +24V ground Internal isolation from GND
X1~X4 Multi-functionl input terminals

1~4

Input specifications:24VDC,5mA
Frequency range:0~200Hz
Voltage range:24V±20%
Digital output Y open collector output Open collector output: 1. Voltage range: 0~24V; 2. Current range: 0~50mA
COM Open collector

Output common terminal

Internal isolation from GND
Relay

Output

RA/RB/RC Relay output RB—RC:Normally opened
RA—RC:Normally closed
Contact capacity:250VAC/3A,30VDC/3A
Terminal 485 485+ 485 differential signal positive Rate:4800/9600/19200/38400/57600/115200 The longest distance is 500m (adopting standard shielded twisted pair cable)
485- 485 differential signal negative
GND 485 communication shield grounding Internal isolation from COM
Documents
Comments

Leave a Reply

Cart